for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 1 HMC207AS8 / 207as8e gaas mmic smt double- ba l a n c e d m i xer, 0.7 - 2.0 ghz v00.1210 general description features functional diagram conversion loss: 9 db lo / i f i solation: 45 db lo / r f i solation: 40 db i nput i p3: +17 dbm e lectrical specifcations, t a = +25 c, as a function of lo drive typical applications the hmc207a s 8 / hmc207a s 8 e is ideal for: ? base s tations ? cable modems ? portable wireless the hmc207a s 8 & hmc207a s 8 e are miniature dou - ble-balanced mixers in 8 lead plastic surface mount s mall outline i c ( s o i c) packages. this passive mm i c mixer is constructed of gaas s chottky diodes and novel planar transformer baluns on the chip. the device can be used as an upconverter, downconverter, biphase modulator (de)modulator, or phase compara - tor. the consistent mm i c performance will improve system operation and assure regulatory compliance. the high lo suppression of 45 to 50 db yields excel - lent carrier suppression for modulator applications. parameter lo = +13 dbm i f = 70 mhz lo = +10 dbm i f = 70 mhz units min. typ. max. min. typ. max. frequency r ange, r f & lo 0.7 - 2.0 0.8 - 1.2 ghz frequency r ange, i f dc - 0.3 dc - 0.3 ghz conversion loss 9 10.5 7.5 10 db noise figure ( ss b) 9 10.5 7.5 10 db lo to r f i solation 32 40 40 45 db lo to i f i solation 38 45 40 45 db r f to i f i solation 17 23 18 22 db i p3 ( i nput) 14 17 12 15 dbm 1 db gain compression ( i nput) 8 11 7 10 dbm
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 2 conversion l oss vs temperature @ lo = +13 d b m isolation @ lo = +13 d b m conversion l oss vs. lo drive v00.1210 r eturn l oss @ lo = +13 d b m if b andwidth @ lo = +13 d b m p1d b vs. temperature @ lo = +13 d b m HMC207AS8 / 207as8e gaas mmic smt double- ba l a n c e d m i xer, 0.7 - 2.0 ghz -20 -15 -10 -5 0 0.5 1 1.5 2 -40 c +25 c +85 c conversion loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 0 0.5 1 1.5 2 rf if lo return loss (db) frequency (ghz) -20 -15 -10 -5 0 0.5 1 1.5 2 +7 dbm +9 dbm +11 dbm +13 dbm +15 dbm conversion loss (db) frequency (ghz) 9 10 11 12 13 14 15 0.5 0.8 1.1 1.4 1.7 2 -40 c +25 c +85 c p1db (dbm) frequency (ghz) -30 -25 -20 -15 -10 -5 0 0 0.2 0.4 0.6 0.8 1 conversion loss (db) if frequency (ghz) -60 -50 -40 -30 -20 -10 0 0.5 1 1.5 2 rf to if lo to if lo to rf isolation (db) frequency (ghz)
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 3 input ip3 vs. temperature @ lo = +13 d b m input ip2 vs. temperature @ lo = +13 d b m input ip3 vs. lo drive input ip2 vs. lo drive v03.0709 gaas mmic smt double- ba l a n c e d m i xer, 0.7 - 2.0 ghz HMC207AS8 / 207as8e 20 30 40 50 60 70 0.5 0.8 1.1 1.4 1.7 2 -40 c +25 c +85 c ip2 (dbm) lo frequency (ghz) 0 10 20 30 40 50 60 70 0.5 0.8 1.1 1.4 1.7 2 +9 dbm +11 dbm +13 dbm ip2 (dbm) lo frequency (ghz) 5 10 15 20 25 30 35 0.5 0.8 1.1 1.4 1.7 2 -40 c +25 c +85 c ip3 (dbm) lo frequency (ghz) -5 0 5 10 15 20 25 30 0.5 0.8 1.1 1.4 1.7 2 +9 dbm +11 dbm +13 dbm ip3 (dbm) lo frequency (ghz) mx n spurious o utputs harmonics of lo nlo m r f 0 1 2 3 4 0 xx 14 27 22 44 1 16 0 46 45 46 2 68 62 67 69 73 3 89 92 91 65 86 4 >105 >105 >105 95 96 r f = 0.9 ghz @ -10 dbm lo = 0.97 ghz @ +13 dbm all values in dbc relative to the i f lo freq. (ghz) nlo s pur at r f port 1 2 3 4 0.7 48 38 66 50 0.9 64 33 73 63 1.1 47 32 54 54 1.3 40 34 39 55 1.5 39 40 45 57 1.7 38 51 42 60 lo = +13 dbm values in dbc below input lo level measured at r f port.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 4 absolute maximum r atings r f / i f i nput +13 dbm lo drive +27 dbm s torage temperature -65 to +150 c operating temperature -40 to +85 c es d s ensitivity (hbm) class 1a e l e ct ro s tat ic se n si t i v e de v ic e ob ser v e handl i ng p re caut i on s v03.0709 gaas mmic smt double- ba l a n c e d m i xer, 0.7 - 2.0 ghz HMC207AS8 / 207as8e o utline drawing part number package body material lead finish m s l r ating package marking [3] hmc207a s 8 low s tress i njection molded plastic s n/pb s older m s l1 [1] hmc207a xxxx hmc207a s 8 e r oh s -compliant low s tress i njection molded plastic 100% matte s n m s l1 [2] hmc207a xxxx [1] max peak refow temperature of 235 c [2] max peak refow temperature of 260 c [3] 4-digit lot number xxxx package information not es: 1. leadframe materi al: copper alloy 2. dimensions are in inches [millimet ers]. 3. dimension does not include moldfla s h of 0.15mm per side. 4. dimension does not include moldfla sh of 0.25mm per side. 5. all gr ound leads mus t be soldere d to pcb rf gr ound.
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 5 v03.0709 gaas mmic smt double- ba l a n c e d m i xer, 0.7 - 2.0 ghz HMC207AS8 / 207as8e pin number function description i nterface schematic 1, 3, 6, 8 gnd package bottom must also be connected to r f/dc ground. 2 lo this pin is dc coupled and matched to 50 ohm. 4 n/c no connection required. these pins may be connected to rf/ dc ground without affecting performance. 5 if this pin is dc coupled. for applications not requiring opera - tion to dc, this port should be dc blocked externally using a series capacitor whose value has been chosen to pass the necessary i f frequency range. for operation to dc, this pin must not source or sink more than 10 ma of current or part non-function and possible part failure will result. 8 rf this pin is dc coupled and matched to 50 ohm. pin descriptions
for price, delivery and to place orders: hittite microwave corporation, 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com application support: phone: 978-250-3343 or apps@hittite.com mixers - si ngl e & doubl e balanc e d - s mt 10 10 - 6 v03.0709 gaas mmic smt double- ba l a n c e d m i xer, 0.7 - 2.0 ghz HMC207AS8 / 207as8e e valuation pc b l ist of materials for e valuation pc b 101785 [1] i tem description j1 - j3 pcb mount s ma r f connector u1 hmc207a s 8 / hmc207a s 8 e mixer pcb [2] 101783 e valuation board [1] r eference this number when ordering complete evaluation pcb [2] circuit board material: r ogers 4350 the circuit board used in the application should use r f circuit design techniques. s ignal lines should have 50 ohm impedance while the package ground leads should be connected directly to the ground plane similar to that shown. a sufficient number of via holes should be used to connect the top and bottom ground planes. the evaluation circuit board shown is available from hittite upon request.
|